Standard Features:
- Mid-Mounted or Rear Mounted Behind Scraper
- All Hydraulic
- 6'/7'/8' Standard Lengths
- 27" Moldboard Height
- 10 ga. Moldboard with 5 Ribs Fully Welded
- 3" x 15" Toe Cylinder with 1-1/2" Nitrided Rod - 15" Stroke
- 3" x 10" Decel Heel Cylinder with 1-1/4" Nitrided Rod with Hydraulic
Restrictor Valves to Adjust the Speed of the Wing Up and Down
- 1-1/4" Main Pivot Bolt
- 7-1/2" of Float at the Toe
- Floating Link Arm at the the Heel
- 3/8" x 4" x 4" Lower Angle with Reinforcing Gussets
- Heavy Duty Adjustable Spring Loaded Push Beam with Shear Pin
- Safety Chain at the Toe
- Saftey Chain at the Rear Stop
- A.A.S.H.O. Standard Punching on all Blades
Options:
- Trip Cutting Edge
Literature:
